1 1

Wedge Anchor for Concrete Zinc 5/8-11 * 5" [Philips Drive]

Wedge Anchor for Concrete Zinc 5/8-11 * 5" [Philips Drive]

$5.00
$4.00 $5.00
Sale Sold out
Shipping calculated at checkout.
Quantity
Download

Also known as wedge anchors, the base expands as you tighten the nut for a secure hold in concrete. They're often used to anchor machinery. Pull-out strength and shear strength values are 25% of the ultimate values.

Zinc-plated and zinc yellow-chromate plated steel anchors are corrosion resistant in wet environments.

ICC listed anchors are often required for new construction. Anchors listed for cracked concrete are often required in environments which may cause concrete to crack during the life of the anchor.

View full details

Specifications
Product Number ANC-07050
Material Zinc-Plated Steel
Diameter 5/8"
Length 5"
Thread Size 5/8"-11
Min. Thread Length 1 3/8"
Washer OD 1 5/16"
Nut Width 15/16"
Drill Bit Size 5/8"
Drill Bit Size Decimal Equivalent 0.625"
Min. Installation Depth 2 3/4"

Strength, lbs.
Pull-Out 1,300
Shear 2,000
Tested In 4,000 psi Concrete
Required Installation Torque 80 ft.-lbs.

Thread
Direction Right Hand
Type UNC
Spacing Coarse
Specifications Met ICC Listed for Cracked Concrete
For Use In Concrete
Includes Hex Nut, Washer
Removable Permanent
Anchor Type Stud
System of Measurement Inch
RoHS RoHS 3 (2015/863/EU) compliant

Specifications
Product Number ANC-07050
Material Zinc-Plated Steel
Diameter 5/8"
Length 5"
Thread Size 5/8"-11
Min. Thread Length 1 3/8"
Washer OD 1 5/16"
Nut Width 15/16"
Drill Bit Size 5/8"
Drill Bit Size Decimal Equivalent 0.625"
Min. Installation Depth 2 3/4"

Strength, lbs.
Pull-Out 1,300
Shear 2,000
Tested In 4,000 psi Concrete
Required Installation Torque 80 ft.-lbs.

Thread
Direction Right Hand
Type UNC
Spacing Coarse
Specifications Met ICC Listed for Cracked Concrete
For Use In Concrete
Includes Hex Nut, Washer
Removable Permanent
Anchor Type Stud
System of Measurement Inch
RoHS RoHS 3 (2015/863/EU) compliant

Specifications
Product Number ANC-07050
Material Zinc-Plated Steel
Diameter 5/8"
Length 5"
Thread Size 5/8"-11
Min. Thread Length 1 3/8"
Washer OD 1 5/16"
Nut Width 15/16"
Drill Bit Size 5/8"
Drill Bit Size Decimal Equivalent 0.625"
Min. Installation Depth 2 3/4"

Strength, lbs.
Pull-Out 1,300
Shear 2,000
Tested In 4,000 psi Concrete
Required Installation Torque 80 ft.-lbs.

Thread
Direction Right Hand
Type UNC
Spacing Coarse
Specifications Met ICC Listed for Cracked Concrete
For Use In Concrete
Includes Hex Nut, Washer
Removable Permanent
Anchor Type Stud
System of Measurement Inch
RoHS RoHS 3 (2015/863/EU) compliant